DY-RX02 Thermal Resistance Calibration Device is a hand-held tool used to calibrate RTD (Temperature Measuring Resistance Body) temperature transmitters. It can simulate and measure many different types of RTDs, and it can also simulate and measure resistors.
[Product Features]
1. Strong protection function: waterproof level IP67, any signal end misconnect 220V automatic protection;
2. Measure the output temperature of the thermal resistance;
3. Simulated thermal resistance output;
4. Accuracy: DY-RX02A 0.02%, DY-RX02B 0.05%;
5. Provide manual stepping, automatic stepping, 0 ~ 100% step and slope output function;
6. With white LED backlight, manual backlight adjustment and automatic power off function, suitable for field use;
7. Unique automatic identification of three-wire, four-wire wiring mode;
Step output, slope output, step output, custom range
Measurement Index
Function
Measurement
Accuracy
DY-RX02A
DY-RX02B
Voltage
0~30.000V
0.02%+2
0.05%+2
Resistance(2 wire, 3 wire)
0.00Ω~440.00Ω
0.15Ω
0.25Ω
400.0Ω~3200.0Ω
1.0Ω
1.5Ω
Resistance(4 wire)
0.00Ω~440.00Ω
0.1Ω
0.15Ω
400.0Ω~3200.0Ω
0.5Ω
1.0Ω
Thermal Resistance
Pt100、Pt1000、Cu50、Cu100
/
/
Unless otherwise stated, all indicators are based on a one-year calibration cycle and are applicable to temperatures ranging from +18 ° C to +28 ° C. All indicators assume a 10-minute warm-up time.
Output Indicators
Function
Measurement
Accuracy
DY-RX02A
DY-RX02B
Resistance
1.00Ω~440.00Ω
0.15Ω
0.25Ω
400.0Ω~3200.0Ω
0.5
1.0
Thermal Resistance
Pt100、Pt1000、Cu50、Cu100
/
/
DY-RX02 Thermal Resistance Calibrator 2020-12-9 This article was read 7918 Times